Subject overview
Refraction
Refractive index, phase speed and Snell’s law at a transparent interface.
01 Refractive Index and Phase Speed
Variables
- refractive index
- 1dimensionless
- phase speed in medium
- m/smeters per second
Key Formulas
Positive real refractive index at one wavelength. n = c₀/v uses the exact vacuum speed c₀ = 299792458 m/s. The speed is phase speed, not automatically group or information velocity. Absorption and dispersion are not calculated.
Prerequisites: algebra and SI unit conversion.
Input domains: refractive index: > 0; phase speed in medium: > 0.
Calculate
Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help
Leave one model quantity empty; enter the others to calculate it.
Positive real refractive index at one wavelength. n = c₀/v uses the exact vacuum speed c₀ = 299792458 m/s. The speed is phase speed, not automatically group or information velocity. Absorption and dispersion are not calculated.
02 Snell’s Law
Variables
- refractive index of incident medium
- 1dimensionless
- refractive index of second medium
- 1dimensionless
- angle of incidence
- radradian
- angle of refraction
- radradian
- critical angle
- radradian
Key Formulas
Requires trigonometry and inverse sine. As the incidence angle increases from a higher-index medium into a lower-index medium, the refracted ray bends farther from the normal. At the critical angle its limiting angle is π/2; substituting sin(π/2) = 1 into Snell’s law gives sin θc = n₂/n₁.
Above the critical angle there is no real propagating refraction angle. For n₁ ≤ n₂, total internal reflection cannot occur in this direction. At equal indices the interface does not bend or reflect the ray in this ideal model.
Light travels from medium 1 into medium 2. All angles are measured from the normal, not from the surface.
Flat interface between homogeneous, isotropic, non-magnetic, transparent media with positive real refractive indices at the same wavelength. Ray paths only: polarization, reflected/transmitted intensities and the evanescent field are not calculated.
Calculate
Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help
Light travels from medium 1 into medium 2. All angles are measured from the normal, not from the surface.
Enter both refractive indices to find whether total internal reflection is possible.
Flat interface between homogeneous, isotropic, non-magnetic, transparent media with positive real refractive indices at the same wavelength. Ray paths only: polarization, reflected/transmitted intensities and the evanescent field are not calculated.
03 Snell’s Law — Inverse Quantities
Variables
- incident-medium refractive index
- 1dimensionless
- second-medium refractive index
- 1dimensionless
- incidence angle from normal
- radradian
- refraction angle from normal
- radradian
Key Formulas
Positive real phase indices at a transparent interface; angles from the normal lie between 0 and π/2. No propagating refracted angle exists above the critical angle. At normal incidence the index ratio cannot be inferred from the angles.
Prerequisites: algebra and SI unit conversion, including trigonometry and inverse sine.
Input domains: incident-medium refractive index: > 0; second-medium refractive index: > 0; incidence angle from normal: 0 ≤ angle ≤ π/2 rad; refraction angle from normal: 0 ≤ angle ≤ π/2 rad.
Calculate
Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help
Leave one model quantity empty; enter the others to calculate it.
Positive real phase indices at a transparent interface; angles from the normal lie between 0 and π/2. No propagating refracted angle exists above the critical angle. At normal incidence the index ratio cannot be inferred from the angles.
04 Refraction from Phase Speeds
Variables
- phase speed in incident medium
- m/smeters per second
- phase speed in second medium
- m/smeters per second
- incidence angle from normal
- radradian
- refraction angle from normal
- radradian
Key Formulas
Snell’s law for phase speeds at a fixed frequency: sin θ₁ / sin θ₂ = c₁ / c₂. Both speeds are positive; angles are measured from the normal.
Prerequisites: algebra and SI unit conversion, including trigonometry and inverse sine.
Input domains: phase speed in incident medium: > 0; phase speed in second medium: > 0; incidence angle from normal: 0 ≤ angle ≤ π/2 rad; refraction angle from normal: 0 ≤ angle ≤ π/2 rad.
Calculate
Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help
Leave one model quantity empty; enter the others to calculate it.
Snell’s law for phase speeds at a fixed frequency: sin θ₁ / sin θ₂ = c₁ / c₂. Both speeds are positive; angles are measured from the normal.
05 Critical Angle and Refractive Indices
Variables
- critical angle
- radradian
- incident-medium refractive index
- 1dimensionless
- second-medium refractive index
- 1dimensionless
Key Formulas
A true critical angle requires n₁ > n₂ > 0. Total internal reflection occurs for θ₁ > θc; the critical ray itself travels along the interface.
Prerequisites: algebra and SI unit conversion, including trigonometry and inverse sine.
Input domains: critical angle: 0 < angle < π/2 rad; incident-medium refractive index: > 0; second-medium refractive index: > 0.
Calculate
Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help
Leave one model quantity empty; enter the others to calculate it.
A true critical angle requires n₁ > n₂ > 0. Total internal reflection occurs for θ₁ > θc; the critical ray itself travels along the interface.
06 Critical Angle and Phase Speeds
Variables
- critical angle
- radradian
- incident-medium phase speed
- m/smeters per second
- second-medium phase speed
- m/smeters per second
Key Formulas
The incident medium must have the lower phase speed: c₁ < c₂. For exit into vacuum, set c₂ = c₀.
Prerequisites: algebra and SI unit conversion, including trigonometry and inverse sine.
Input domains: critical angle: 0 < angle < π/2 rad; incident-medium phase speed: > 0; second-medium phase speed: > 0.
Calculate
Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help
Leave one model quantity empty; enter the others to calculate it.
The incident medium must have the lower phase speed: c₁ < c₂. For exit into vacuum, set c₂ = c₀.