Subject overview

Heat Transfer

Temperature differences and steady heat flow through thermal resistance.

01

Thermal Resistance

Calculate

Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help

Enter the model inputs to calculate the results.

Steady heat flow through a lumped positive thermal resistance. P is positive from side 1 to side 2; negative P means reversed heat flow. ΔT = T₁ − T₂ and P = ΔT/Rth. Radiation, convection and temperature dependence must already be represented by the supplied resistance.

02

Heat Transfer Rate

Calculate

Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help

Leave one model quantity empty; enter the others to calculate it.

Mean heat transfer rate over a positive elapsed interval.

03

Heat Carried by a Flow

Calculate

Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help

Leave one model quantity empty; enter the others to calculate it.

Steady sensible-heat transport with constant specific heat and no phase change: Φ = ṁ c ΔT. The printed m·t·c·T expression is dimensionally incorrect; mass flow rate replaces mass times time.

04

Solar Irradiance Projection

Calculate

Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help

Leave one model quantity empty; enter the others to calculate it.

Direct-beam geometric projection only; α is measured from the receiving surface, unlike the normal-angle convention in photometry. E₀ is supplied explicitly, not fixed to the source’s historical solar irradiance value. Atmospheric and diffuse radiation are excluded.

05

Thermal Conduction

Calculate

Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help

Enter known quantities; each independent relation is evaluated as soon as it is determined.

Steady one-dimensional conduction through a homogeneous plane layer with constant conductivity and no internal heat generation.

Constant steady conduction maintained throughout the interval; this also solves the source’s conductivity formula for every quantity.

k = λ/ℓ is the conductance per area of the solid layer alone. It is not the overall coefficient when finite surface resistances are present.

Mean heat transfer rate over a positive elapsed interval.

06

Heat Transfer at a Surface

Calculate

Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help

Leave one model quantity empty; enter the others to calculate it.

Newton’s cooling relation with a constant effective heat transfer coefficient and fixed surface-to-fluid temperature difference.

07

Overall Heat Transfer

Calculate

Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help

Enter known quantities; each independent relation is evaluated as soon as it is determined.

Steady one-dimensional heat transfer between two fluids through a wall with fixed overall coefficient. All layers carry the same heat rate; their temperature drops and resistances add.

One homogeneous wall and two finite surface films with equal areas: 1/k = 1/α₁ + ℓ/λ + 1/α₂. The missing ℓ in the source’s overall-resistance formula is restored. Every resistance and coefficient must remain positive.