Subject overview
Thermal Expansion
Linear, area and volume expansion, and density changes at fixed mass.
01 Linear Expansion
Variables
- size change
- mmeter
- initial size
- mmeter
- expansion coefficient
- 1/Kinverse kelvin
- temperature change
- Kkelvin interval
- final length
- mmeter
Key Formulas
First-order expansion with constant coefficient over the temperature interval; the relative size change must be small. Negative changes describe contraction. For isotropic solids the area and volume coefficients are approximately 2α and 3α; for liquids β is the measured volume coefficient. The final size must stay positive.
Prerequisites: algebra and SI unit conversion.
Input domains: size change: finite real; initial size: > 0; expansion coefficient: finite real; temperature change: finite real.
Constant-coefficient first-order thermal expansion with positive initial and final dimensions. Use a constant mean linear coefficient over the interval.
Input domains: final length: > 0; initial length: > 0; linear expansion coefficient: finite real; temperature difference: finite real.
Final size is initial size plus the signed change. Both physical sizes must remain positive; contraction has negative change.
Input domains: final length: > 0; initial length: > 0; size change: finite real.
Calculate
Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help
Enter known quantities; each independent relation is evaluated as soon as it is determined.
First-order expansion with constant coefficient over the temperature interval; the relative size change must be small. Negative changes describe contraction. For isotropic solids the area and volume coefficients are approximately 2α and 3α; for liquids β is the measured volume coefficient. The final size must stay positive.
Constant-coefficient first-order thermal expansion with positive initial and final dimensions. Use a constant mean linear coefficient over the interval.
Final size is initial size plus the signed change. Both physical sizes must remain positive; contraction has negative change.
02 Area Expansion
Variables
- size change
- m²square meter
- initial size
- m²square meter
- expansion coefficient
- 1/Kinverse kelvin
- temperature change
- Kkelvin interval
- final area
- m²square meter
Key Formulas
First-order expansion with constant coefficient over the temperature interval; the relative size change must be small. Negative changes describe contraction. For isotropic solids the area and volume coefficients are approximately 2α and 3α; for liquids β is the measured volume coefficient. The final size must stay positive.
Prerequisites: algebra and SI unit conversion.
Input domains: size change: finite real; initial size: > 0; expansion coefficient: finite real; temperature change: finite real.
Constant-coefficient first-order thermal expansion with positive initial and final dimensions. For area, 2α applies to an isotropic solid and small strains.
Input domains: final area: > 0; initial area: > 0; linear expansion coefficient: finite real; temperature difference: finite real.
Final size is initial size plus the signed change. Both physical sizes must remain positive; contraction has negative change.
Input domains: final area: > 0; initial area: > 0; size change: finite real.
Calculate
Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help
Enter known quantities; each independent relation is evaluated as soon as it is determined.
First-order expansion with constant coefficient over the temperature interval; the relative size change must be small. Negative changes describe contraction. For isotropic solids the area and volume coefficients are approximately 2α and 3α; for liquids β is the measured volume coefficient. The final size must stay positive.
Constant-coefficient first-order thermal expansion with positive initial and final dimensions. For area, 2α applies to an isotropic solid and small strains.
Final size is initial size plus the signed change. Both physical sizes must remain positive; contraction has negative change.
03 Solid Volume Expansion
Variables
- size change
- m³m³
- initial size
- m³m³
- expansion coefficient
- 1/Kinverse kelvin
- temperature change
- Kkelvin interval
- final volume
- m³m³
- volume expansion coefficient
- 1/Kinverse kelvin
Key Formulas
First-order expansion with constant coefficient over the temperature interval; the relative size change must be small. Negative changes describe contraction. For isotropic solids the area and volume coefficients are approximately 2α and 3α; for liquids β is the measured volume coefficient. The final size must stay positive.
Prerequisites: algebra and SI unit conversion.
Input domains: size change: finite real; initial size: > 0; expansion coefficient: finite real; temperature change: finite real.
Constant-coefficient first-order thermal expansion with positive initial and final dimensions. For isotropic solids γ ≈ 3α; liquids use their independent volume coefficient.
Input domains: final volume: > 0; initial volume: > 0; volume expansion coefficient: finite real; temperature difference: finite real.
Final size is initial size plus the signed change. Both physical sizes must remain positive; contraction has negative change.
Input domains: final volume: > 0; initial volume: > 0; size change: finite real.
First-order approximation for isotropic solids: γ ≈ 3α. Liquid volume coefficients must be measured independently.
Input domains: volume expansion coefficient: finite real; linear expansion coefficient: finite real.
Calculate
Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help
Enter known quantities; each independent relation is evaluated as soon as it is determined.
First-order expansion with constant coefficient over the temperature interval; the relative size change must be small. Negative changes describe contraction. For isotropic solids the area and volume coefficients are approximately 2α and 3α; for liquids β is the measured volume coefficient. The final size must stay positive.
Constant-coefficient first-order thermal expansion with positive initial and final dimensions. For isotropic solids γ ≈ 3α; liquids use their independent volume coefficient.
Final size is initial size plus the signed change. Both physical sizes must remain positive; contraction has negative change.
First-order approximation for isotropic solids: γ ≈ 3α. Liquid volume coefficients must be measured independently.
04 Liquid Volume Expansion & Density
Variables
- size change
- m³m³
- initial size
- m³m³
- expansion coefficient
- 1/Kinverse kelvin
- temperature change
- Kkelvin interval
- final density
- kg/m³kilograms per cubic meter
- initial density
- kg/m³kilograms per cubic meter
- final volume
- m³m³
Key Formulas
First-order expansion with constant coefficient over the temperature interval; the relative size change must be small. Negative changes describe contraction. For isotropic solids the area and volume coefficients are approximately 2α and 3α; for liquids β is the measured volume coefficient. The final size must stay positive.
Prerequisites: algebra and SI unit conversion.
Input domains: size change: finite real; initial size: > 0; expansion coefficient: finite real; temperature change: finite real.
Fixed mass, homogeneous material and first-order volume expansion V₂ = V₁(1 + βΔT). Conservation of mass gives ρ₂ = ρ₁/(1 + βΔT). The volume factor must be positive.
Input domains: final density: > 0; initial density: > 0; volume expansion coefficient: finite real; temperature change: finite real.
Calculate
Numbers or expressions: (), +, -, *, /, ^. Prefixes: 1.5k, 250m, 20u. Results: 3 significant figures. Input help
Enter known quantities; each independent relation is evaluated as soon as it is determined.
First-order expansion with constant coefficient over the temperature interval; the relative size change must be small. Negative changes describe contraction. For isotropic solids the area and volume coefficients are approximately 2α and 3α; for liquids β is the measured volume coefficient. The final size must stay positive.
Fixed mass, homogeneous material and first-order volume expansion V₂ = V₁(1 + βΔT). Conservation of mass gives ρ₂ = ρ₁/(1 + βΔT). The volume factor must be positive.
Constant-coefficient first-order thermal expansion with positive initial and final dimensions. For isotropic solids γ ≈ 3α; liquids use their independent volume coefficient.
Final size is initial size plus the signed change. Both physical sizes must remain positive; contraction has negative change.